Write a review
Average User Review
There is no review for this company
| Products Catalog Language: English Indonesia |
showing 1-18 of 18 |
| Products Catalog: SOUND LEVEL METER 720 | ||||
|
SPECIFICATION :
Linearity range >107 dB Max RMS level 143 dBA (typical) RMS noise floor 30 dBA (typical) Time weighting Slow, fast, impulse Frequency weighting A and C Microphone 3/8" electret Bias supply 0, 28, and 200 volts DC Memory 64 KB Communications RS-232 serial interface DC output 0-3 volts at 600 ohms AC output A- weighted range 38.4 dBuV ti 128.4 dBuV C....
| ||||
| Products Catalog: Air Quality Monitoring (YES Environment Technologies) | ||||
|
Dimensions 3.87" wide 3.06" deep 7.75" high
98mm wide 18.5 oz 524g 78mm deep 197mm high Weight Enclosure Material Rugged ABS / Polycarbonate UL94-HB flame rated Power Standard: Alkaline "AA" X 3 Display Large, multi-line, backlit LCD. All installed sensors indicated at one time plus battery status, recording status Sample Circuit Internal sample pump @ 0.5 LPM....
| ||||
| Products Catalog: Air Quality Monitor (YES Environment Technologies) | ||||
|
Dimensions:10.2" wide 7.08" deep 2.56" high, 259mm wide,180mm deep 65mm high,
Weight : 3.0 lbs 1.4 kg Enclosure Material : Rugged ABS (UL flame rated) c/w mulit-position, adjustable aluminum carrying handle/stand Power : Rechargable NiMH battery pack (12 to 14 hours continuous operation time), c/w plug-in battery charger/wall adapter (North American 120V configuration),....
| ||||
| Products Catalog: Baseline® Hydraulic Push-Pull Dynamometers and Force Gauges | ||||
|
Muscle Strength Testing Ideal for a wide range of individual muscle groups using both the push (compression) and pull (tension) modes. The push mode, subjective observations of the manual muscle test (Kendall technique) are replaced by objective repeatable measurements. All positive features of the manual muscle test are retained: all muscle groups may be tested; positioning of the....
| ||||
| Products Catalog: Baseline® Hydraulic Hand Dynamometers and Pinch Gauges | ||||
|
Baseline® Hydraulic Hand Dynamometers
Baseline® hand dynamometers give accurate grip strength readings without the subject being able to "feel" the handle move. The results are consistent with the published Baseline and Jamar® studies. The internationally accepted design assures reliability, user convenience and measurement repeatability. The five position....
| ||||
| Products Catalog: Baseline® Electronic Push-Pull Dynamometers and Force Gauges | ||||
|
The Baseline Electronic push-pull dynamometer uses state-of
-the-art "load-cell" technology to assure the highest standards of accuracy, repeatability and reliability. The unit is available in four measurement ranges and comes complete with 3 push pads, 1 pull hook and a padded carry case. All units are CE certified and come with a 1-year warranty. Handles and accessories are....
| ||||
| Products Catalog: (LAFAYETTE) Occupational Skills Assessment Test Battery Model 32604 | ||||
|
This battery is used to measure the progress in rehabilitation and return-to-work capability of individuals performing jobs/tasks that require manual dexterity, hand-eye coordination, steadiness and perceptual motor skills. Placement personnel and human resource departments can pretest a job suitability for assembly and other jobs where frequent manipulation of objects in confined....
| ||||
| Products Catalog: (LAFAYETTE) MANUAL MUSCLE TEST SYSTEM MODEL 01163 | ||||
|
Specification :
Size: 3" x 4" x 1.5" Weight: 10 ounces (260 grams) Range: 0-300 pounds (136 kilograms) / 0-50 pounds (22 kilograms) Accuracy: +/- 1.0 pound high range / +/- 0.5 pound low range Resolution: 0.4 pound high range / 0.1 pound low range Battery Life: 80-85 hours, 10-12 hours after low battery condition Timing Accuracy: +/- 0.03% Data Storage Capacity: 52 tests....
| ||||
| Products Catalog: (LAFAYETTE) Sit and Reach Flexibility Test Model 01285A | ||||
|
The standard sit and reach test will test the maximum flexibility of the back attainable without undue strain on the back muscles. The flexibility of the back muscles can indicate the tasks or movements the back is capable of performing. The Flexibility Tester is a highly accurate and valid method of measuring back flexibility. It replaces the crude measuring devices described by....
| ||||
| Products Catalog: (LAFAYETTE) Professional Vision Tester w/ Peripheral Test Model 14019A | ||||
|
This precision-built stereoscopic instrument is designed for rapid and concise measurement of visual performance. The results show how well the subject's eyes perform by using the 12 test slides included with each unit. These test slides provide four basic test classifications: phoria, acuity, stereopsis and color.
Includes • One Purdue Job Standards book (6 templates) • A scoring key ....
| ||||
| Products Catalog: (LAFAYETTE) Modified Bassin Anticipation Timer Model 35580 | ||||
|
When mounted on a series of tripods and connected to a photocell, the Bassin Anticipation Timer Model 35575 is modified for a more complex task. The goal is to time the approach of the light with the swing of a bat so that the infrared beam is broken at the same time that the light reaches the end of the runway. This unit could be applicable for a bat swing, tennis swing, or even a....
| ||||
| Products Catalog: (LAFAYETTE) Large Anthropometer Model 01290 dan Small Anthropometer Model 01291 | ||||
|
The Large Anthropometer has a range of 0 to 60 cm in 0.1 cm increments. Popular uses include measuring shoulder width, long bone length and chest depth for tracking growth and development of children or for use in motion analysis studies. Aluminum in construction, it uses a spring-loaded ball bearing in a sliding C-shaped arm to provide accurate and precise measurement.
The Small....
| ||||
| Products Catalog: (LAFAYETTE) Lafayette Manual Muscle Test (MMT) System | ||||
|
System Features • Designed for high inter-instrument reproducibility • Three, easy to change molded plastic stirrups with pads • Force measurement in pounds or kilograms (user selectable) • Measures peak force, time to reach peak force and total test time • Data storage for up to 52 tests in on-board memory (peak force and time to reach peak force) • Manual or automatic storage of data ....
| ||||
| Products Catalog: (LAFAYETTE) Lafayette Gollehon Extendable Goniometer Model 01135 | ||||
|
Versatility, Reliability, Accuracy and Portability are the advantages that make the Gollehon Extendable Goniometer an innovative tool in the assessment of range of motion. Its arms can extend to 22.25" to measure large joints and retract to 6.875" to measure all but the smallest joints. Unlike standard goniometers that require the examiner to estimate alignment, the length of....
| ||||
| Products Catalog: (LAFAYETTE) JAMAR Hydraulic Hand Dynamometer Model J00105 | ||||
|
This precision instrument is designed for both routine screening and for evaluation of hand trauma or diseased hands. The adjustable handle can be placed in five grip positions, from 1.375" to 3.375", in half-inch increments. This sealed hydraulic system features a dual-scale readout that displays isometric grip force from 0 to 200 pounds (90 kg). Includes instructions, norms,....
| ||||
| Products Catalog: (LAFAYETTE) Lafayette Chest Depth Caliper Model 01140 | ||||
|
This aluminum instrument accurately measures chest depth in inches or centimeters. Popular uses include measuring maximum chest expansion from resting to full inspiration. Range is from 0 to 24" in 0.50" graduations (0 to 60 cm with 2.0 cm graduations).
| ||||
| Products Catalog: (LAFAYETTE) ERGO-KIT MMT MODEL 01163-EK | ||
|
Features and Benefits of the Ergo-Kit MMT System
* System Features - Uses load cell technology (±1% accuracy over full scale) with built-in calibration routine and microprocessor control to measure peak force in lb. or kg. - Measures Time to reach peak force and total test time. - All components fit in as small, very light protective case. - Battery-powered with low battery....
| ||
| Products Catalog: (LAFAYETTE) 7-PIECE HAND EVALUATION SETS MODEL 12-0100 | ||||
|
Product Details :
Instruments needed for a full hand evaluation are stored in case. Grip strength is measuredby the hydraulic hand dynamometer (12-0240, 12-0243, 12-0246 or 12-0247) and pinch strength by the 30 lb. (12-0200) or 60 lb. (12-0201) mechanical pinch gauge. Other measurements are made with the stainless steel goniometer (12-1010), 2-point discriminator with 3rd point (12-1481....
| ||||
showing 1-18 of 18